Researchers at the Department of Energy's Oak Ridge National Laboratory and the University of Maine have designed and 3D-printed a single-piece, recyclable natural-material floor panel tested to be strong enough to replace construction materials like steel.

The project is part of the Sustainable Materials & Manufacturing Alliance for Renewable Technologies, or SM2ART, program. The SM2ART team previously constructed BioHome3D, the nation's first additively manufactured home made entirely from biologically based materials.

BioHome3D's components and the floor panel were recently displayed during the U.S. Dept. of Housing and Urban Development's 2024 Housing Innovation Showcase on the National Mall.

The SM2ART Nfloor cassette panel was developed to replace traditional steel-and-concrete surface assemblies as a transformative step for constructing apartment and condominium buildings. The technology has the potential to create strong, biologically based sections that could make multistory buildings more environmentally friendly. It could also help increase the use of sustainable structures that are made in a modular construction facility.

Modular, or panelized, manufacturing creates complete sections of a building at an offsite factory before delivery to a construction site for final assembly. The method is becoming a cost-effective way to develop sustainable residential structures in urban areas.

ORNL researcher Katie Copenhaver said this first effort to make a strong building floor panel from green resources significantly advances the potential for increasing the use of organic materials in modular, multiresidential buildings.

"By utilizing bio-based, large-scale 3D printing, we replaced an assembly made from 31 parts and three materials with a single-material floor panel that is ecologically friendly," she said, "and with the same strength as traditional steel floor fabrication."

The SM2ART floor cassette's sturdiness comes from its unique formulation of polylactic acid, or PLA, which is a biodegradable thermoplastic-polyester bioplastic derived from corn residue and wood flour made from the waste of lumber processing.

"The PLA and wood flour blend is an excellent material for producing recyclable, large-format additively manufactured parts," said Scott Tomlinson, structural engineer with the University of Maine's Advanced Structures and Composites Center. "This single-piece floor assembly is stiffer and provides an improved walking experience when compared to the steel-concrete assembly it replaces."

To construct the floor panel, researchers used a large-scale 3D printer to deposit the PLA/wood flour mixture in a precise, geometric shape. By working continuously and autonomously, the printer produced the SM2ART Nfloor cassette at scale, layer upon layer, in about 30 hours. The process created a labor-savings of about 33% compared to the effort needed to construct a similar steel floor assembly by hand.